Wall-Mounted All-in-One Energy Storage System 1000W 2000Wh LiFePO4 Battery

Wall-Mounted All-in-One Energy Storage System with 1000W Output and 2009.6Wh Capacity

The wall-mounted all-in-one energy storage system combines a 1000W inverter, a 2009.6Wh lithium iron phosphate (LiFePO4) batterie, and integrated charging functions in a compact enclosure. Designed for space-conscious energy storage applications, it offers a practical solution for backup power, small-scale solar energy storage, and selected residential or off-grid power requirements.

With a rated AC output of 1000W and pure sine wave output, the system is designed to supply compatible electrical equipment within its rated power limits. Its integrated design helps simplify system planning and installation compared with assembling separate inverter and battery components.

Integrated LiFePO4 Battery and Inverter

The system features a 2009.6Wh LiFePO4 battery with a nominal battery voltage of 6.4V and a typical capacity of 314Ah. The integrated battery and inverter design brings energy storage and power conversion together in one unit, helping reduce installation complexity and equipment footprint.

The battery has a specified maximum charge current of 220A and maximum discharge current of 220A. Actual operating performance depends on the system’s protection controls, température, connected loads, and operating conditions.

Solar and AC Charging Options

The system supports solar charging with a maximum solar charging power of 550W. Its solar input specifications include an MPPT voltage range of 13–55V DC and a maximum PV open-circuit voltage of 56V DC.

AC charging power is rated at up to 800W. The specification also lists a maximum combined utility and solar charging power of 800W, so the total charging power should not be interpreted as 800W from each source simultaneously.

These charging options give system integrators flexibility when designing charging arrangements for suitable applications. Solar panel configuration must remain within the specified voltage and power limits.

Pure Sine Wave AC Output

The rated AC output power is 1000W, with an output voltage of 185–230VAC at 50Hz. Pure sine wave output is suitable for compatible appliances and electronic equipment that require an AC power supply, provided their starting surge and continuous power demands remain within the system’s capabilities.

The unit also provides a 5W maximum DC output through one 5V/1A USB charging socket for compatible low-power devices.

Compact Wall-Mounted Design

With product dimensions of 500 × 360 × 90mm and a net weight of 18.8kg, the unit is designed for applications where installation space matters. Its wall-mounted form factor can help organize the energy storage area, subject to suitable wall strength, mounting hardware, ventilation, and installation requirements.

The specification lists an operating temperature range of -10°C to +50°C, relative humidity of 5–95% without condensation, and an operating altitude of up to 2,000m.

Built-In Protection and Battery Management

The system specification lists protection against overcharging, over-discharging, surintensité, short circuits, and overtemperature. These protections help support safer operation when the product is installed and used according to its instructions.

For OEMs, distributeurs, installateurs solaires, and energy equipment suppliers, the product offers a compact integrated platform for selected backup-power and small-scale energy storage projects. Buyers should confirm output requirements, solar panel compatibility, installation conditions, and any regional electrical requirements before placing an order.