18650 4000Celda de batería de iones de litio mAh: Alta densidad de energía y potencia confiable para aplicaciones avanzadas
As portable electronic devices, equipos industriales, and advanced battery powered systems continue to evolve, battery manufacturers are looking for lithium ion cells that deliver higher energy density, reliable discharge performance, and compact dimensions.
El 18650 4000mAh lithium ion battery cell is designed to meet these requirements. Featuring NMC lithium ion chemistry, una tensión nominal de 3,6 V, and a typical capacity of 4000mAh, this cylindrical battery cell provides a practical balance of energy storage, salida de potencia, y tamaño compacto.
1. High Capacity in a Compact 18650 Formato

El 18650 cylindrical format is widely used in rechargeable battery packs because of its standardized dimensions and flexible integration options.
With a typical capacity of 4000mAh and a typical energy rating of 14.41Wh, this cell offers high energy storage within a compact cylindrical structure.
Its dimensions are approximately 18.35mm in diameter and 65.05mm in height, making it suitable for battery pack designs where space utilization and energy capacity are important considerations.
2. NMC Lithium Ion Chemistry
NMC lithium ion chemistry is commonly selected for applications requiring a combination of energy density and power performance.
This cell features a nominal voltage of 3.6V and a charging voltage of 4.2V. Its typical capacity is 4000mAh, with a minimum capacity of 3850mAh.
These specifications provide battery pack designers with essential electrical parameters for evaluating cell configurations and system requirements.
3. High Energy Density for Compact Battery Designs

Energy density is an important consideration when developing lightweight and space efficient battery systems.
The cell provides the following energy density specifications:
-
Gravimetric energy density: 300Wh/kg
-
Volumetric energy density: 830Wh/L at 30% SOC
-
Typical energy: 14.41¿Qué?
These characteristics can help battery manufacturers develop compact battery packs while making efficient use of available installation space.
Actual battery pack energy density will depend on cell configuration, structural design, conexiones electricas, protection systems, y gestión térmica.
4. Discharge Performance for Power Demanding Applications

Battery cells used in demanding equipment must be evaluated not only by capacity but also by discharge capability.
Este 18650 lithium ion cell supports a maximum continuous discharge current of 12A, equivalent to 3C based on its typical capacity. It also supports a maximum pulse discharge current of 20A for less than 30 artículos de segunda clase.
These specifications provide battery pack designers with options for applications that require both energy storage and short duration power output.
The final battery pack current rating must be determined according to the complete system design and operating conditions.
5. Charging Characteristics and Temperature Range

Proper charging conditions are essential for battery performance and operational safety.
The cell has a standard charging voltage of 4.20V. Its typical charging current is 2A, while the maximum charging current is 4A under the specified 0% a 100% SOC condition.
Los rangos de temperatura de funcionamiento especificados son:
| Parámetro | Rango de temperatura |
|---|---|
| Temperatura de carga | 0°C a +45°C |
| Temperatura de descarga | minus 20°C to +60°C |
| Temperatura de almacenamiento | minus 20°C to +30°C |
Battery pack manufacturers should consider thermal management, control de carga, and protection design when integrating cells into a complete battery system.
6. Aplicaciones potenciales
The combination of compact dimensions, alta capacidad, and discharge capability makes this cell worth evaluating for different rechargeable battery pack projects.
Las posibles áreas de aplicación incluyen:
-
Equipos de energía portátiles.
-
Industrial battery packs
-
Professional electronic equipment
-
Compact energy storage systems
-
Rechargeable power tools
-
Custom lithium ion battery assemblies
Final application suitability should be confirmed through electrical, térmico, mecánico, and safety validation of the complete battery pack.
7. Cycle Life and Testing Considerations
Cycle life is an important factor when evaluating rechargeable lithium ion cells.
The referenced cycle life is 600 cycles under the specified test conditions, including 0.5C charging, minus 1C discharging, and a voltage range of 4.2V to 2.75V.
Actual cycle life may vary depending on charging and discharging rates, temperatura de funcionamiento, profundidad de descarga, condiciones de almacenamiento, and battery management strategy.
Para proyectos de baterías comerciales, buyers should evaluate cycle life under the intended operating profile rather than relying on a single laboratory reference value.
8. Especificaciones técnicas de un vistazo
| Artículo | Especificación |
|---|---|
| Formato de celda | 18650 |
| Química de la batería | NMC Lithium Ion |
| Tensión nominal | 3.60V |
| Capacidad típica | 4000mAh |
| Capacidad mínima | 3850mAh |
| Energía típica | 14.41¿Qué? |
| Voltaje de carga | 4.20V |
| Corriente máxima de descarga continua | 12A |
| Corriente máxima de descarga de pulso | 20A for less than 30 artículos de segunda clase |
| Densidad de energía gravimétrica | 300Wh/kg |
| Diámetro | 18.35 ± 0,15 mm |
| Altura | 65.05 ± 0,15 mm |
| Peso | 48 ± 2g |
9. Choosing the Right Cell for Your Battery Project
Selecting a suitable lithium ion cell requires more than comparing nominal capacity.
Battery manufacturers and project buyers should evaluate voltage requirements, continuous and peak current, temperatura de funcionamiento, espacio de instalación disponible, expected cycle life, and battery management requirements.
For customized battery pack development, it is also important to confirm the series and parallel configuration, estrategia de protección, diseño térmico, and applicable testing requirements.
Si estás abasteciendo 18650 4000mAh lithium ion battery cells for a new battery pack project, sharing your target application, cantidad requerida, corriente de descarga, and operating environment can help determine whether this cell matches your project requirements.
Contact us to discuss your battery cell sourcing requirements, evaluación de muestras, and OEM or ODM battery pack projects.