18650 4000ماه خلية بطارية ليثيوم أيون: كثافة طاقة عالية وقدرة موثوقة للتطبيقات المتقدمة
As portable electronic devices, المعدات الصناعية, and advanced battery powered systems continue to evolve, battery manufacturers are looking for lithium ion cells that deliver higher energy density, reliable discharge performance, and compact dimensions.
ال 18650 4000mAh lithium ion battery cell is designed to meet these requirements. Featuring NMC lithium ion chemistry, الجهد الاسمي 3.6 فولت, and a typical capacity of 4000mAh, this cylindrical battery cell provides a practical balance of energy storage, انتاج الطاقة, and compact size.
1. High Capacity in a Compact 18650 شكل

ال 18650 cylindrical format is widely used in rechargeable battery packs because of its standardized dimensions and flexible integration options.
With a typical capacity of 4000mAh and a typical energy rating of 14.41Wh, this cell offers high energy storage within a compact cylindrical structure.
Its dimensions are approximately 18.35mm in diameter and 65.05mm in height, making it suitable for battery pack designs where space utilization and energy capacity are important considerations.
2. NMC Lithium Ion Chemistry
NMC lithium ion chemistry is commonly selected for applications requiring a combination of energy density and power performance.
This cell features a nominal voltage of 3.6V and a charging voltage of 4.2V. Its typical capacity is 4000mAh, with a minimum capacity of 3850mAh.
These specifications provide battery pack designers with essential electrical parameters for evaluating cell configurations and system requirements.
3. High Energy Density for Compact Battery Designs

Energy density is an important consideration when developing lightweight and space efficient battery systems.
The cell provides the following energy density specifications:
-
Gravimetric energy density: 300واط/كجم
-
Volumetric energy density: 830Wh/L at 30% شركة نفط الجنوب
-
Typical energy: 14.41هل
These characteristics can help battery manufacturers develop compact battery packs while making efficient use of available installation space.
Actual battery pack energy density will depend on cell configuration, structural design, التوصيلات الكهربائية, protection systems, والإدارة الحرارية.
4. Discharge Performance for Power Demanding Applications

Battery cells used in demanding equipment must be evaluated not only by capacity but also by discharge capability.
هذا 18650 lithium ion cell supports a maximum continuous discharge current of 12A, equivalent to 3C based on its typical capacity. It also supports a maximum pulse discharge current of 20A for less than 30 ثواني.
These specifications provide battery pack designers with options for applications that require both energy storage and short duration power output.
The final battery pack current rating must be determined according to the complete system design and operating conditions.
5. Charging Characteristics and Temperature Range

Proper charging conditions are essential for battery performance and operational safety.
The cell has a standard charging voltage of 4.20V. Its typical charging current is 2A, while the maximum charging current is 4A under the specified 0% ل 100% SOC condition.
نطاقات درجة حرارة التشغيل المحددة هي:
| المعلمة | نطاق درجة الحرارة |
|---|---|
| درجة حرارة الشحن | 0درجة مئوية إلى +45 درجة مئوية |
| درجة حرارة التفريغ | minus 20°C to +60°C |
| درجة حرارة التخزين | minus 20°C to +30°C |
Battery pack manufacturers should consider thermal management, التحكم في الشحن, and protection design when integrating cells into a complete battery system.
6. التطبيقات المحتملة
The combination of compact dimensions, high capacity, and discharge capability makes this cell worth evaluating for different rechargeable battery pack projects.
وتشمل مجالات التطبيق المحتملة:
-
معدات الطاقة المحمولة
-
Industrial battery packs
-
Professional electronic equipment
-
Compact energy storage systems
-
Rechargeable power tools
-
Custom lithium ion battery assemblies
Final application suitability should be confirmed through electrical, الحرارية, ميكانيكية, and safety validation of the complete battery pack.
7. Cycle Life and Testing Considerations
Cycle life is an important factor when evaluating rechargeable lithium ion cells.
The referenced cycle life is 600 cycles under the specified test conditions, including 0.5C charging, minus 1C discharging, and a voltage range of 4.2V to 2.75V.
Actual cycle life may vary depending on charging and discharging rates, درجة حرارة التشغيل, عمق التفريغ, ظروف التخزين, and battery management strategy.
لمشاريع البطاريات التجارية, buyers should evaluate cycle life under the intended operating profile rather than relying on a single laboratory reference value.
8. المواصفات الفنية في لمحة
| غرض | مواصفة |
|---|---|
| تنسيق الخلية | 18650 |
| كيمياء البطارية | NMC Lithium Ion |
| الجهد الاسمي | 3.60V |
| القدرة النموذجية | 4000ماه |
| الحد الأدنى من السعة | 3850ماه |
| الطاقة النموذجية | 14.41هل |
| شحن الجهد | 4.20V |
| الحد الأقصى لتيار التفريغ المستمر | 12أ |
| الحد الأقصى لتيار تفريغ النبض | 20A for less than 30 ثواني |
| كثافة الطاقة الوزنية | 300واط/كجم |
| القطر | 18.35 ± 0.15 ملم |
| ارتفاع | 65.05 ± 0.15 ملم |
| وزن | 48 ± 2g |
9. Choosing the Right Cell for Your Battery Project
Selecting a suitable lithium ion cell requires more than comparing nominal capacity.
Battery manufacturers and project buyers should evaluate voltage requirements, continuous and peak current, درجة حرارة التشغيل, مساحة التثبيت المتاحة, expected cycle life, and battery management requirements.
For customized battery pack development, it is also important to confirm the series and parallel configuration, استراتيجية الحماية, التصميم الحراري, and applicable testing requirements.
إذا كنت مصادر 18650 4000mAh lithium ion battery cells for a new battery pack project, sharing your target application, الكمية المطلوبة, تيار التفريغ, and operating environment can help determine whether this cell matches your project requirements.
Contact us to discuss your battery cell sourcing requirements, تقييم العينة, and OEM or ODM battery pack projects.