5000mAh 21700 Cellule de batterie au lithium-ion à haut débit pour les applications de batteries professionnelles

Table des matières

High Capacity and High Power in a Compact Cylindrical Cell

As battery-powered equipment continues to evolve, battery manufacturers need cells that combine high capacity, forte performance de décharge, and reliable operating characteristics. Le 21700 cylindrical lithium ion cell with a typical capacity of 5000mAh is designed to support professional battery pack development where both energy capacity and power output matter.

With a nominal voltage of 3.6V and nominal energy of 18Wh, this cell provides a practical energy solution for a wide range of rechargeable battery applications. Its cylindrical 21700 format also offers battery pack designers a standardized form factor for developing compact and scalable battery configurations.

30A Continuous Discharge for High Power Requirements

Discharge capability is an important consideration when selecting cells for demanding applications. Ce 21700 lithium ion cell supports a maximum continuous discharge current of 30A under specified test conditions, making it suitable for battery pack designs that require high current output.

For applications involving short duration power demands, the cell also supports a pulse discharge current of up to 100A for 3 seconds under the specified test conditions.

These electrical characteristics give battery manufacturers flexibility when designing battery packs for equipment with different power requirements. The final battery pack performance will depend on cell configuration, gestion thermique, connexions électriques, protection systems, et conditions de fonctionnement.

Charging Performance and Temperature Management

The cell has a standard charging current of 2.5A and a maximum charging current of 10A under specified cell surface temperature conditions.

Charging current must be controlled according to the cell surface temperature. Charging is not permitted below 0°C or above 45°C, and the applicable charging current must follow the temperature dependent limits in the technical specification.

Pour les fabricants de batteries, an appropriate battery management system and temperature monitoring strategy are essential. Correct charging control helps ensure that the cell operates within its specified limits.

Cycle Life Performance for Different Discharge Conditions

Cycle life is an important factor in evaluating lithium ion cells for rechargeable battery applications.

Dans les conditions de test spécifiées, the cell demonstrates the following cycle life results:

  • Plus que 80% of initial measured capacity after 900 cycles using a 5A charge and 5A discharge profile.
  • Plus que 80% of initial measured capacity after 350 cycles using a 5A charge and 30A discharge profile.

These results demonstrate how discharge conditions can affect cycle life performance. Actual service life will vary depending on charging and discharging rates, température, profondeur de décharge, conditions de stockage, et conception de la batterie.

Large plage de températures de décharge

Temperature performance is another important consideration for battery applications. This cell supports a specified discharge temperature range from minus 40°C to 65°C.

Its temperature discharge performance has also been evaluated under defined test conditions. Par exemple, the measured discharge capacity is above 80% at minus 30°C and above 85% at minus 20°C, using the specified 25°C discharge capacity as the reference.

Charging and discharging temperature limits are different. Battery pack designers should therefore implement suitable thermal management and operating controls for the intended application.

Designed for Professional Battery Pack Manufacturing

The cell features a diameter of 21.7 ± 0.2mm and a height of 70.8 ± 0,3 mm, with a typical weight of 70.0 ± 2,0 g.

These dimensions provide useful design references for battery pack engineers during mechanical layout, espacement des cellules, holder selection, and pack integration.

For professional battery manufacturers and project buyers, important selection factors include:

  • Required battery pack voltage and capacity
  • Continuous and peak discharge current
  • Charging current and temperature limits
  • Thermal management requirements
  • Battery management system compatibility
  • Mechanical structure and installation space
  • Application specific safety and testing requirements

A complete battery pack should be engineered and validated according to its intended application. Cell level specifications should not be treated as guaranteed battery pack performance.

Suitable for Multiple Battery Pack Applications

The combination of 5000mAh typical capacity, 30A continuous discharge capability, and a compact cylindrical format makes this cell a candidate for professional battery pack development.

Les domaines d'application potentiels comprennent:

  • High power portable equipment
  • Rechargeable industrial equipment
  • Power tool battery packs
  • High rate lithium ion battery systems
  • Customized battery pack projects
  • Other applications requiring high current cylindrical cells

Final suitability should be confirmed through electrical, thermique, mécanique, and safety validation for each specific application.

Looking for a Reliable 21700 Cellule pour votre projet de batterie?

Choosing the right lithium ion cell is an important step in developing a competitive battery product. Capacité, courant de décharge, conditions de charge, performances en température, dimensions, and cycle life should all be considered together.

Pour les fabricants de batteries, distributeurs, and OEM or ODM project buyers, ce 21700 5000mAh high rate lithium ion cell offers a technical foundation for customized battery pack development.

Contact our team with your required voltage, capacité, courant de décharge, application, and estimated order quantity to discuss cell selection and project requirements.

Faire défiler vers le haut