High Capacity and High Power in a Compact Cylindrical Cell
As battery-powered equipment continues to evolve, battery manufacturers need cells that combine high capacity, strong discharge performance, and reliable operating characteristics. The 21700 cylindrical lithium ion cell with a typical capacity of 5000mAh is designed to support professional battery pack development where both energy capacity and power output matter.
With a nominal voltage of 3.6V and nominal energy of 18Wh, this cell provides a practical energy solution for a wide range of rechargeable battery applications. Its cylindrical 21700 format also offers battery pack designers a standardized form factor for developing compact and scalable battery configurations.
30A Continuous Discharge for High Power Requirements
Discharge capability is an important consideration when selecting cells for demanding applications. This 21700 lithium ion cell supports a maximum continuous discharge current of 30A under specified test conditions, making it suitable for battery pack designs that require high current output.
For applications involving short duration power demands, the cell also supports a pulse discharge current of up to 100A for 3 seconds under the specified test conditions.
These electrical characteristics give battery manufacturers flexibility when designing battery packs for equipment with different power requirements. The final battery pack performance will depend on cell configuration, thermal management, electrical connections, protection systems, and operating conditions.
Charging Performance and Temperature Management
The cell has a standard charging current of 2.5A and a maximum charging current of 10A under specified cell surface temperature conditions.
Charging current must be controlled according to the cell surface temperature. Charging is not permitted below 0°C or above 45°C, and the applicable charging current must follow the temperature dependent limits in the technical specification.
For battery pack manufacturers, an appropriate battery management system and temperature monitoring strategy are essential. Correct charging control helps ensure that the cell operates within its specified limits.
Cycle Life Performance for Different Discharge Conditions
Cycle life is an important factor in evaluating lithium ion cells for rechargeable battery applications.
Under the specified test conditions, the cell demonstrates the following cycle life results:
- More than 80% of initial measured capacity after 900 cycles using a 5A charge and 5A discharge profile.
- More than 80% of initial measured capacity after 350 cycles using a 5A charge and 30A discharge profile.
These results demonstrate how discharge conditions can affect cycle life performance. Actual service life will vary depending on charging and discharging rates, temperature, depth of discharge, storage conditions, and battery pack design.
Wide Discharge Temperature Range
Temperature performance is another important consideration for battery applications. This cell supports a specified discharge temperature range from minus 40°C to 65°C.
Its temperature discharge performance has also been evaluated under defined test conditions. For example, the measured discharge capacity is above 80% at minus 30°C and above 85% at minus 20°C, using the specified 25°C discharge capacity as the reference.
Charging and discharging temperature limits are different. Battery pack designers should therefore implement suitable thermal management and operating controls for the intended application.
Designed for Professional Battery Pack Manufacturing
The cell features a diameter of 21.7 ± 0.2mm and a height of 70.8 ± 0.3mm, with a typical weight of 70.0 ± 2.0g.
These dimensions provide useful design references for battery pack engineers during mechanical layout, cell spacing, holder selection, and pack integration.
For professional battery manufacturers and project buyers, important selection factors include:
- Required battery pack voltage and capacity
- Continuous and peak discharge current
- Charging current and temperature limits
- Thermal management requirements
- Battery management system compatibility
- Mechanical structure and installation space
- Application specific safety and testing requirements
A complete battery pack should be engineered and validated according to its intended application. Cell level specifications should not be treated as guaranteed battery pack performance.
Suitable for Multiple Battery Pack Applications
The combination of 5000mAh typical capacity, 30A continuous discharge capability, and a compact cylindrical format makes this cell a candidate for professional battery pack development.
Potential application areas include:
- High power portable equipment
- Rechargeable industrial equipment
- Power tool battery packs
- High rate lithium ion battery systems
- Customized battery pack projects
- Other applications requiring high current cylindrical cells
Final suitability should be confirmed through electrical, thermal, mechanical, and safety validation for each specific application.
Looking for a Reliable 21700 Cell for Your Battery Project?
Choosing the right lithium ion cell is an important step in developing a competitive battery product. Capacity, discharge current, charging conditions, temperature performance, dimensions, and cycle life should all be considered together.
For battery manufacturers, distributors, and OEM or ODM project buyers, this 21700 5000mAh high rate lithium ion cell offers a technical foundation for customized battery pack development.
Contact our team with your required voltage, capacity, discharge current, application, and estimated order quantity to discuss cell selection and project requirements.